Select Page
Posted by admin | Apr 24, 2016 | Linux, Technology-Howto |
Install monit apt-get install monit Configuring of monit vi /etc/monit/monitrc enable following line , to view the services via http set httpd port 2812 and use address localhost # only accept connection from localhost allow...
Read MoreTo interconnect e1 Gateway (or any SIPGW) to eVOX-PBX (or other PBX , like FreePBX, concept is the same): There is two method: First Method : E1-GW sign in to IPPBX. To use this method, create an Dummy Extension at IPPBX, and...
Read MorePosted by admin | Apr 24, 2016 | Technology-Howto |
When your wordpress blog keep down , not enough connection, while you not expecting that much of traffic, check the web server log see if you can get this, and get a lot of this : [24/Apr/2016:18:49:01 +0800] “POST...
Read MoreFor running KVM virtualization, here is steps of creating template from installed VM: 1)Shutdown the VM 2) Issue following command : qemu-img convert -O raw Source-Disk.raw Destination-Template.img * There is no compression, so...
Read MoreIn Microsoft Windows Server Environment : We use netsh with FOR loop for quickly add IP to windows system FOR /L %variable IN (start,step,end) DO command So we could easily add every IP address from an entire subnet using this...
Read More| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| « Feb | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| 8 | 9 | 10 | 11 | 12 | 13 | 14 |
| 15 | 16 | 17 | 18 | 19 | 20 | 21 |
| 22 | 23 | 24 | 25 | 26 | 27 | 28 |
| 29 | 30 | |||||